WhatsApp Inquiry
| Equivalent Part no. Type 1 | Equivalent part no Type 2 | Tube OD Ø T | MALE PIPE WELD SIZE P | BODY HEX F | C | Ø E | ØT1 | D | L | NUT HEX W |
|---|---|---|---|---|---|---|---|---|---|---|
| - 200 - 1 - 2W | 2 -1/8 ZHLW2 | 1/8 | 1/8 | 7/16 | 0.6 | 0.09 | 0.405 | 0.5 | 1.2 | 7/16 |
| - 300 - 1 - 2W | 3 -1/8 ZHLW2 | 3/16 | 1/8 | 7/16 | 0.63 | 0.12 | 0.405 | 0.54 | 1.23 | 1/2 |
| - 400 - 1 - 2W | 4 -1/8 ZHLW2 | 1/4 | 1/8 | 1/2 | 0.7 | 0.19 | 0.405 | 0.6 | 1.29 | 9/16 |
| - 400 - 1 - 4W | 4 -1/4 ZHLW2 | 1/4 | 1/4 | 9/16 | 0.7 | 0.19 | 0.54 | 0.6 | 1.49 | 9/16 |
| - 500 - 1 - 2W | 5 -1/8 ZHLW2 | 5/16 | 1/8 | 5/8 | 0.73 | 0.2 | 0.405 | 0.64 | 1.34 | 5/8 |
| - 500 - 1 - 4W | 5 -1/4 ZHLW2 | 5/16 | 1/4 | 5/8 | 0.73 | 0.25 | 0.54 | 0.64 | 1.52 | 5/8 |
| - 600 - 1 - 4W | 6 -1/4 ZHLW2 | 3/8 | 1/4 | 11/16 | 0.76 | 0.28 | 0.54 | 0.66 | 1.57 | 11/16 |
| - 600 - 1 - 6W | 6 -3/8 ZHLW2 | 3/8 | 3/8 | 11/16 | 0.76 | 0.28 | 0.675 | 0.66 | 1.57 | 11/16 |
| - 600 - 1 - 8W | 6 -1/2 ZHLW2 | 3/8 | 1/2 | 7/8 | 0.76 | 0.28 | 0.84 | 0.66 | 1.82 | 11/16 |
| - 600 - 1 - 12W | 6 -3/4 ZHLW2 | 3/8 | 3/4 | 11/16 | 0.76 | 0.28 | 1.05 | 0.66 | 1.88 | 11/16 |
| - 810 - 1 - 6W | 8 -3/8 ZHLW2 | 1/2 | 3/8 | 7/8 | 0.86 | 0.41 | 0.675 | 0.9 | 1.71 | 7/8 |
| - 810 - 1 - 8W | 8 -1/2 ZHLW2 | 1/2 | 1/2 | 7/8 | 0.86 | 0.41 | 0.84 | 0.9 | 1.93 | 7/8 |
| - 810 - 1 - 12W | 8 -3/4 ZHLW2 | 1/2 | 3/4 | 1.1/6 | 0.86 | 0.41 | 1.05 | 0.9 | 1.99 | 7/8 |
| - 1010 - 1 - 8W | 10 -1/2 ZHLW2 | 5/8 | 1/2 | 1 | 0.86 | 0.5 | 0.84 | 0.96 | 1.93 | 1 |
| - 1210 - 1 - 12W | 12 -3/4 ZHLW2 | 3/4 | 3/4 | 1.1/16 | 0.86 | 0.62 | 1.05 | 0.96 | 1.99 | 1.1/8 |
| - 1610 - 1 - 16W | 16 -1 ZHLW2 | 1 | 1 | 1.3/8 | 1.04 | 0.88 | 1.315 | 1.23 | 2.45 | 1.1/2 |
Note :
The E dimension is the minimum opening & fittings of this group may be back drilling to lager id at pipe thread or straight thread end.
Dimension l, c, d is shown in the finger-tight position.
Dimensions are for reference only and subject to change.
Male Pipe Weld Connector - Fractional Tube X Pipe Butt Weld
Rs0.0000
Note :
The E dimension is the minimum opening & fittings of this group may be back drilling to lager id at pipe thread or straight thread end.
Dimension l, c, d is shown in the finger-tight position.
Dimensions are for reference only and subject to change.
If you need more details about a nifty little lifecycle of your order's journey from the time you place your order to your new treasures arriving at your doorstep, please contact us.