WhatsApp Inquiry
| H | W | H1 | L | Size | CV | ORIFICE |
|---|---|---|---|---|---|---|
| 77(3.03") | 32"(1.26") | 84(3.31") | 90(3.54") | 1/2"(Mxf) | 0.45 | 4.7(0.18") |
| 77(3.03") | 32"(1.26") | 84(3.31") | 90(3.54") | 1/2"(MxM) | 0.45 | 4.7(0.18") |
Bonnet Assembly :
Screwed bonnet design.
Bonnet - back seated blow out proof
Spindle - ground and thread rolled.
Spindle tip - non rotating tip shut off type - regulting and soft seated. Packing below thread.
Bonnet pusher - silver plated for anti galling freezing for increased stem cycle life.
Dust cap protects stem threads from externals contamination leak tight seal with low operating torque.
Technical specifications :
End Connection : NPT, BSPT , Socket Weld.
Working Pressure : 6000 psi (431 bar)
Temperature Rating : ptfe 450° f (232 ° c ) grafoil 700 °f (371° c)
Material of Construction : SS 304 , Monel , C.S , SS 316
Stem Pcking : PTFE Grafoil
Orifice: ø4.7
All valves are 100% factory tested prior to shipment.
Optional sour gas service valves are available confirming to nace STD MR - 01 - 75
Application :
Pressure switches, gauges & differential pressure , pressure transmeters suitable for block & bleed assemblies to test pressure source required in sampling line or plug valve. Refineries, liquid petroleum gas processing plant petro- chemical plants systems difficult to shut of due to solid contents dust, rust, dirt etc
Testing :
Pneumatic seat test is performed at 1/4 of working pressure hydrostatic shell test is performed at 1.5 times the working pressure optional test are available upon request.
Lubrication :
Molybdenum disulphide (mo s2)
Gauge Valve - Gauge Screwed Bonnet Needle Valve (Model GSNV 2) With Bleed Plug Straight & Angle Pattern)
Rs0.0000
Bonnet Assembly :
Screwed bonnet design.
Bonnet - back seated blow out proof
Spindle - ground and thread rolled.
Spindle tip - non rotating tip shut off type - regulting and soft seated. Packing below thread.
Bonnet pusher - silver plated for anti galling freezing for increased stem cycle life.
Dust cap protects stem threads from externals contamination leak tight seal with low operating torque.
Technical specifications :
End Connection : NPT, BSPT , Socket Weld.
Working Pressure : 6000 psi (431 bar)
Temperature Rating : ptfe 450° f (232 ° c ) grafoil 700 °f (371° c)
Material of Construction : SS 304 , Monel , C.S , SS 316
Stem Pcking : PTFE Grafoil
Orifice: ø4.7
All valves are 100% factory tested prior to shipment.
Optional sour gas service valves are available confirming to nace STD MR - 01 - 75
Application :
Pressure switches, gauges & differential pressure , pressure transmeters suitable for block & bleed assemblies to test pressure source required in sampling line or plug valve. Refineries, liquid petroleum gas processing plant petro- chemical plants systems difficult to shut of due to solid contents dust, rust, dirt etc
Testing :
Pneumatic seat test is performed at 1/4 of working pressure hydrostatic shell test is performed at 1.5 times the working pressure optional test are available upon request.
Lubrication :
Molybdenum disulphide (mo s2)
If you need more details about a nifty little lifecycle of your order's journey from the time you place your order to your new treasures arriving at your doorstep, please contact us.